Methodology
For factor-based categories, values pass through the configured base unit: base value = input value × source factor, then output value = base value ÷ target factor.
Back to Tools
Engineering Tool · Instrumentation & Digital
Membrane Flux Unit Converter
Instantly convert between LMH, GFD, and other Membrane Flux units — accurate, free, and built for water treatment engineering work.
ENGINEERING TOOLS
Membrane Flux
3 units
Membrane Flux — Unit Converter
3 units available
Quick Reference Table
| Unit | Converted to LMH | LMH converted to unit |
|---|---|---|
| LMD | 1 LMD = 0.041667 LMH | 1 LMH = 24 LMD |
| GFD | 1 GFD = 1.6977 LMH | 1 LMH = 0.589017 GFD |
01
Engineering Basis
Assumptions
- Convert only between units in the same physical quantity family and with the same declared concentration or operating basis.
Scope / Limitations
- The converter normalizes units; it does not validate source data, infer a process basis, or replace the assumptions of a downstream model.
02
Engineering Path
Upstream Context
- Declared value and source unit Use the unit stated on the sample record, supplier sheet, or design note.
Current Tool Decision
- Membrane Flux Unit Converter Convert within this quantity family while preserving the declared engineering basis.
Downstream Engineering Step
- RO System Designer Use the normalized value in the relevant engineering calculation and verify its basis.
- NF System Designer Use the normalized value in the relevant engineering calculation and verify its basis.
- UF/MF System Designer Use the normalized value in the relevant engineering calculation and verify its basis.