Methodology
For factor-based categories, values pass through the configured base unit: base value = input value × source factor, then output value = base value ÷ target factor.
Back to Tools
Engineering Tool · Instrumentation & Digital
Mass & Weight Unit Converter
Instantly convert between kg, lb, and other Mass & Weight units — accurate, free, and built for water treatment engineering work.
ENGINEERING TOOLS
Mass & Weight
6 units
Mass & Weight — Unit Converter
6 units available
Quick Reference Table
| Unit | Converted to kg | kg converted to unit |
|---|---|---|
| g | 1 g = 0.001 kg | 1 kg = 1000 g |
| t (metric) | 1 t (metric) = 1000 kg | 1 kg = 0.001 t (metric) |
| lb | 1 lb = 0.453592 kg | 1 kg = 2.2046 lb |
| oz | 1 oz = 0.02835 kg | 1 kg = 35.274 oz |
| US ton (short) | 1 US ton (short) = 907.1847 kg | 1 kg = 0.00110231 US ton (short) |
01
Engineering Basis
Assumptions
- Convert only between units in the same physical quantity family and with the same declared concentration or operating basis.
Scope / Limitations
- The converter normalizes units; it does not validate source data, infer a process basis, or replace the assumptions of a downstream model.
02
Engineering Path
Upstream Context
- Declared value and source unit Use the unit stated on the sample record, supplier sheet, or design note.
Current Tool Decision
- Mass & Weight Unit Converter Convert within this quantity family while preserving the declared engineering basis.
Downstream Engineering Step
- GAC Breakthrough & Bed-Life Designer Use the normalized value in the relevant engineering calculation and verify its basis.
- Water Treatment Residuals & Sludge Designer Use the normalized value in the relevant engineering calculation and verify its basis.
- Chemical Feed & Storage Designer Use the normalized value in the relevant engineering calculation and verify its basis.