Skip to main content
ATLAS Water Treatment Solutions

Search

Search ATLAS engineering resources

Find research, tools, applications, process designs, and current intelligence from one engineering search.

Start with a discovery path

Research Tools Applications Process Design Intelligence

Start with a discovery path
Back to Process Design
Process design — engineering workflows

Municipal & Industrial Wastewater Treatment

Eight decision stages from influent acceptance through preliminary and primary treatment, alternative biological paths, secondary solids separation, optional polishing, disinfection, and effluent/reuse/discharge review.

ApplicationMunicipal & Industrial Wastewater Relevant disciplinesTreatment Process Design

01 Wastewater Treatment Train

Wastewater Treatment Train

Eight decision stages from influent acceptance to effluent, reuse, or discharge review, with parallel residuals and plant-wide systems.

8 Stages

Scroll horizontally to view all stages

Tools for Stage 01 — Influent & Acceptance Basis

Wastewater Influent Basis PRIMARY · AVAILABLE Convert wastewater flow and water-quality data into a hydraulic and mass-loading design basis for downstream treatment. Open tool Wastewater Influent Basis — Acceptance Criteria Extension OPTIONAL · AVAILABLE Compare user- or project-declared acceptance criteria with traceable wastewater sample and load cases; this extension does not certify regulatory compliance, toxicity, treatability, or source acceptance. Open tool

Stage 01 · Source basis

Influent & Acceptance Basis

Set traceable flow, load, sampling, and source-acceptance boundaries.

Purpose

Establish traceable flow and constituent cases, sample provenance, variability, and any owner-declared industrial acceptance envelope before selecting treatment units.

Next decision

Choose headworks protection and decide whether declared time-varying flows require equalization.

Engineering questions

  • Which average, peak, minimum, and event flows govern?
  • Do concentration records pair with the same sample point and time basis?
  • Which source acceptance limits, compatibility flags, and data gaps must be declared?

Key inputs

  • Flow casesm³/d, m³/h
  • Temperature range°C
  • Measured pHpH
  • Constituent concentrationsmg/L
  • Sampling and acceptance recordsproject basis

Key outputs

  • Flow casesm³/d, m³/h
  • Constituent concentrationskg/d
  • Sampling and acceptance recordsproject basis

Design Considerations

  • An influent basis does not certify source acceptance, compatibility, or regulatory classification.
  • Industrial toxicity, biodegradability, inhibition, and neutralization demand require representative evidence; they are not inferred from total COD or pH.

Tools for this stage

PRIMARY · AVAILABLE Wastewater Influent Basis Convert wastewater flow and water-quality data into a hydraulic and mass-loading design basis for downstream treatment. Open tool OPTIONAL · AVAILABLE Wastewater Influent Basis — Acceptance Criteria Extension Compare user- or project-declared acceptance criteria with traceable wastewater sample and load cases; this extension does not certify regulatory compliance, toxicity, treatability, or source acceptance. Open tool

Supporting research

Supporting research

No stage-specific research mapping is published for this boundary.

02 — Parallel Process Systems

Parallel Process Systems

Parallel branches connect to the liquid train where residuals are generated and handled.

Residuals & Sludge

A parallel solids path receives primary sludge, biological WAS, chemical solids, screenings/grit, and tertiary wastes; declared liquid returns reconnect to the plant balance.

OPTIONAL · AVAILABLEWater Treatment Residuals & Sludge DesignerEstimate captured raw solids, chemical solids yield, optional backwash and other residuals, and wet-slurry volume.Open tool
PRIMARY · COMING SOONWastewater Sludge & Residuals DesignerCombine primary sludge, biological WAS, chemical solids, and headworks/tertiary residuals, then screen thickening, dewatering, storage, handling, and returns.

03 — Plant-wide Design Systems

Plant-wide Design Systems

These systems support multiple process stages and do not add sequential stages to the treatment train.

Plant Water / Mass Balance

Reconcile declared flows and one constituent today; a wastewater network extension is planned for named solids/components and sidestream returns.

SHARED · AVAILABLEPlant Water & Mass BalanceSolve a plant-wide steady-state water and constituent balance across process, waste, and declared recycle streams.Open tool
SHARED · COMING SOONPlant Water & Mass Balance — Wastewater Network ExtensionExtend the current one-constituent balance to named wastewater water, solids, recycle, transformation, and sidestream-return boundaries.

Hydraulics / Pumping

Use the existing sequential HGL screen within its segment limits; wastewater channels, EGL/TDH, and connected pump-duty review are planned extensions.

SHARED · AVAILABLEWater Treatment Plant Hydraulic ProfileTrack hydraulic grade through entered pipe, pump, fixed-loss, and basin-boundary segments.Open tool
SHARED · COMING SOONWastewater Hydraulic Profile & Pumping DesignerExtend plant HGL review to wastewater channels, control structures, flow cases, EGL/TDH, and declared pump-duty checks.

Chemical Systems

Process tools own chemistry and dose selection; shared tools convert an entered dose to feed, inventory, and storage needs.

SHARED · AVAILABLEChemical Dosing Basis CalculatorCalculate active-chemical demand and commercial-product feed separately, with explicit product purity/strength carried through continuous and batch results.Open tool SHARED · AVAILABLEChemical Feed & Storage DesignerCalculate active and commercial-product feed, solution volume, storage, and optional pump-capability screening per chemical.Open tool

03 Research and Intelligence Context

Research and Intelligence Context

Supporting research and current industry signals for this workflow.

Supporting research

A2O Biological Nutrient Removal: Why Nearly Every Real Plant Runs a Modified FlowsheetThe anaerobic-anoxic-oxic process looks like a clean three-zone design, but its single-sludge architecture creates three unavoidable internal conflicts — SRT, carbon competition, and recycle interference — that every major flowsheet variant exists specifically to work around.Oversized Process Equipment in Industrial Water Treatment: Why Safety Margins Become Hidden Life-Cycle CostsStacked safety factors on pumps, blowers, membranes, and tanks don't just raise the purchase price — they push equipment out of its efficient operating window for years. A life-cycle model built on a real MBR retrofit shows a phased, right-sized design beating a one-time oversized build by roughly 10%, even when the deferred expansion eventually happens.Chemical Treatment Programs for Reverse Osmosis Membrane Systems: Antiscalants, Dechlorination, Biocides, and Cleaning FormulationsA functional breakdown of the six chemical treatment categories governing RO membrane performance — antiscalants, dechlorination, biocides, coagulants, pH adjustment, and CIP — with dosing benchmarks, compatibility limits, and advanced fouling-monitoring parameters.

Current intelligence

Sabesp Adds 725 L/s UF Capacity and Expands MBR Wastewater TreatmentBrazilian utility upgrades combine high-rate ultrafiltration with an 84% MBR capacity increase, shifting attention to membrane availability, residuals handling and lifecycle cost.China Mandates Strict New Textile Wastewater Standards (GB 4287-2026) with Biological Toxicity IndicatorsThe Ministry of Ecology and Environment unites textile discharge codes into a single rigorous framework, introducing Zebrafish egg acute toxicity testing and source-separation mandates for indirect discharges.